EUDR Compliance Checklist: Everything You Need Before 30 December 2026

The EU Deforestation Regulation (EUDR) starts applying on 30 December 2026 for large and medium companies, and on 30 June 2027 for micro and small companies. After those dates, cattle, cocoa, coffee, oil palm, rubber, soya and wood products (and many goods made from them) can only be placed on the EU market or exported from it if they are deforestation-free, legally produced, and backed by a due diligence statement. 

Why the EU is doing this: according to the UN Food and Agriculture Organization (FAO), around 420 million hectares of forest have been lost to deforestation since 1990, mostly through conversion to farmland. EUDR aims to make sure products sold in the EU aren’t part of that. 

The regulation, Regulation (EU) 2023/1115, has been delayed twice and simplified once, so a lot of older guidance online is now wrong. In its 4 May 2026 review, the European Commission kept the current dates and proposed no further changes to the text. As of October 2026, there is no proposal on the table to delay it again. 

This checklist pulls everything together in one place: who must comply, which products are covered, the deadlines, the data you need to collect, how to assess risk, and how to file. Work through it top to bottom and you’ll know exactly where your business stands. 

EUDR checklist at a glance 

To comply with EUDR, you need to confirm your role and products are in scope, collect geolocation and legality evidence from your suppliers, assess and mitigate deforestation risk, and file a due diligence statement before the goods move. Here’s the short version; each step is explained in detail below. 

Step  What to do  Who it applies to 
1. Confirm your role  Operator, downstream operator, trader, SME or non-SME  Everyone 
2. Check product scope  Match HS codes against Annex I  Everyone 
3. Know your deadline  30 Dec 2026 (large/medium) or 30 Jun 2027 (micro/small)  Everyone 
4. Do due diligence  Collect information, prove legality, assess and mitigate risk  Operators 
5. Collect geolocation  GPS point or polygon for every plot of production  Operators and their suppliers 
6. Check country risk  Low, standard or high risk sets the level of checks  Operators 
7. File a due diligence statement  Submit in TRACES and put the reference on the customs declaration  Operators 
8. Stay inspection-ready  Keep records for five years and review annually  Operators, non-SME traders 

Step 1: Work out your role under EUDR 

Your obligations depend on whether you are the operator who first places a product on the EU market (or exports it), a downstream operator or trader further along the chain, or a non-EU supplier. After the December 2025 amendment, Regulation (EU) 2025/2650, most of the paperwork now sits with the first company in the chain. 

Role  Who it is  Main obligations 
Operator (first placer)  The EU importer, or EU producer, who first places the product on the EU market, or the company that exports it from the EU  Full due diligence: collect information, assess risk, mitigate risk, and submit a due diligence statement (DDS) in the EU Information System before placing or exporting 
Micro or small primary operator in a low-risk country  A small producer placing its own goods from a low-risk country  A one-time simplified declaration instead of repeated statements; a postal address can replace geolocation, and an estimate of production volume is accepted 
Downstream operator or trader  A company that buys, processes or resells products that are already on the EU market  No DDS. Non-SMEs must register in the Information System. The first downstream company must collect and keep the reference number of the original DDS 
Non-EU supplier or manufacturer  Factories, exporters and producers outside the EU (for example in China or Vietnam)  Not directly regulated, but your EU customers cannot file without your traceability data. In practice, no data means no order 

 

EUDR roles,  who files what: 

If your product is in scope and you’re the first to place it on the EU market, you carry full due diligence; everyone after you only keeps the reference number. 

If you are a supplier outside the EU, treat this checklist as a list of what your EU buyers will ask you for. Many are already requesting it in 2026 contracts. 

Are you an SME or a non-SME? 

Your company size decides your deadline and some of your obligations, and EUDR uses the size categories of the EU Accounting Directive (2013/34/EU). A company falls into a category if it doesn’t exceed at least two of the three limits. 

Category  Employees  Balance sheet total  Net turnover  EUDR deadline 
Micro  Up to 10  Up to EUR 450,000  Up to EUR 900,000  30 June 2027 
Small  Up to 50  Up to EUR 5 million  Up to EUR 10 million  30 June 2027 
Medium  Up to 250  Up to EUR 25 million  Up to EUR 50 million  30 December 2026 
Large  Above the medium limits      30 December 2026 

The financial limits were raised for inflation by Commission Delegated Directive (EU) 2023/2775. Micro and small companies already covered by the old EU Timber Regulation must still comply with wood products from 30 December 2026. 

Step 2: Check whether your products are covered 

EUDR covers seven commodities (cattle, cocoa, coffee, oil palm, rubber, soya and wood) and the derived products listed by HS code in Annex I of the regulation. If your product, or a component made from these commodities, appears in Annex I, it is in scope. If it isn’t listed, it isn’t covered, even if it contains one of the commodities. 

Commodity  Examples of covered products 
Wood  Logs, sawn timber, plywood, wooden furniture, pulp, paper, paperboard, packaging, charcoal 
Cocoa  Cocoa beans, paste, butter, powder, chocolate 
Coffee  Green and roasted coffee, coffee husks; soluble coffee from 30 December 2027 
Oil palm  Palm oil, palm kernel oil and listed derivatives; certain derivatives such as soaps from 30 December 2027 
Soya  Soya beans, flour, oil, oilcake 
Cattle  Live cattle, beef; frozen cattle tongues from 30 December 2027 
Rubber  Natural rubber and listed rubber articles 

The product list changed on 18 September 2026, when Delegated Regulation (EU) 2026/2102 entered into force. Leather, most retreaded tyres, and some rubber articles and vehicle seats are now out of scope. Printed books, newspapers and printed pictures were already removed in December 2025, but paper and packaging are still covered. 

Checklist: 

  • ☐ List every product you place on, or export from, the EU market 
  • ☐ Match each to its HS code and check it against the current Annex I 
  • ☐ Flag packaging: wood-based packaging sold as a product is covered, but packaging used only to support or protect another product is not 
  • ☐ Re-check any leather, tyre or rubber lines against the September 2026 list 

Step 3: Know your EUDR deadline 

Large and medium companies must comply from 30 December 2026; micro and small companies from 30 June 2027. Goods arriving from 30 December 2026 must already comply, so the purchase orders being negotiated now are the ones that matter. 

Date  What happens 
31 December 2020  Cut-off date. Land used to produce the commodity must not have been deforested or degraded after this date 
30 December 2026  Obligations apply to large and medium companies, and to micro and small companies already covered by the EU Timber Regulation 
30 June 2027  Obligations apply to micro and small companies 
30 December 2027  Newly added products (soluble coffee, certain palm oil derivatives, frozen cattle tongues) become mandatory 
30 June 2030  Next general review of the regulation 

 

 

Step 4: The EUDR due diligence checklist 

EUDR due diligence has three parts: collect the required information, assess the risk that the product isn’t compliant, and mitigate any risk that is more than negligible. Only then can you file a due diligence statement and place the goods on the market. Here is everything each part requires. 

Part A: Collect the information (Article 9) 

For every batch you place on the market or export, you need: 

  • Product description, trade name, HS code and, for wood, the common and full scientific species name 
  • Quantity (net mass, volume or number of units) 
  • Country of production, and where relevant the region 
  • Geolocation of every plot of land where the commodity was produced (see Step 5) 
  • Date or time range of production or harvest 
  • Name, postal address and email of your supplier, and of the customer you sell to 
  • Verifiable evidence that the product is deforestation-free (land not deforested after 31 December 2020) 
  • Verifiable evidence that the product was produced legally under the laws of the country of production 

Part B: Prove legality 

“Legal” under EUDR means complying with the producing country’s laws in six areas, not just forestry law. Collect documents that cover: 

  • Land use rights 
  • Environmental protection 
  • Forest-related rules, including forest management and harvesting 
  • Third parties’ rights 
  • Labour rights and human rights protected under international law 
  • Free, prior and informed consent where it applies, plus tax, anti-corruption, trade and customs rules 

The Commission plans to launch a public repository of each producing country’s relevant laws before December 2026, which will make this step easier. 

Part C: Assess the risk (Article 10) 

  • Check the country risk level of every country of production (see Step 6) 
  • Check for forests, indigenous peoples or land disputes in the production area 
  • Assess supply chain complexity, including the risk of mixing with products of unknown origin 
  • Look for circumvention risk, such as goods routed through a low-risk country 
  • Review corruption, document falsification and law enforcement concerns in the country 
  • Consider any substantiated concerns raised by NGOs, authorities or the media 
  • Note certifications or third-party verification schemes, which support your assessment but don’t replace it 
  • Document your conclusion and review the assessment at least once a year 

Part D: Mitigate any non-negligible risk (Article 11) 

If the risk isn’t negligible, you can’t place the product on the market until it is. Typical measures: 

  • Request extra documents or data from suppliers 
  • Commission independent surveys, audits or on-site verification 
  • Use satellite monitoring to confirm no deforestation after the cut-off date 
  • Support suppliers, especially smallholders, with training and capacity building 
  • Have adequate internal policies, controls and a named compliance officer (non-SME operators also need an independent audit function) 

Part E: Keep records 

  • Keep all due diligence documentation for at least five years 
  • Non-SME operators: publish an annual public report on your due diligence system 

Step 5: Collect geolocation data 

You need the geolocation of every plot of land where your commodity was produced: a single GPS point for plots up to 4 hectares, and a full polygon for plots larger than 4 hectares. This is the requirement most supply chains struggle with, because the data has to come from the farm or forest level, often several tiers away from the importer. 

Situation  What you need 
Plot of 4 hectares or less  One latitude/longitude point (at least six decimal places) 
Plot larger than 4 hectares (except cattle)  Polygon with enough points to outline the perimeter 
Cattle  Geolocation of every establishment where the cattle were kept 
Micro or small primary operator in a low-risk country  A postal address may be used instead (simplified declaration) 

Checklist: 

  • Map your supply chain back to the plot of production for every product line 
  • Ask suppliers for coordinates or polygons in GeoJSON format, which the EU Information System accepts 
  • Check every plot against satellite imagery or a deforestation map for changes after 31 December 2020 
  • Keep products from verified plots separate from unverified material (segregation), or make sure the whole mixed batch can be traced 
  • Add geolocation and EUDR data clauses to supplier contracts 

 

Free tools for checking plots: the Commission’s EU Observatory on Deforestation and Forest Degradation publishes a global forest cover map for 2020, and Global Forest Watch, run by the World Resources Institute, shows tree cover loss year by year. Neither is legally binding on its own, but both are widely used as evidence in risk assessments. 

Step 6: Check the country risk level 

The Commission classifies every country as low, standard or high risk, and the classification decides how much due diligence you must do and how often authorities will check you. The current list is set out in Implementing Regulation (EU) 2025/1093, published in May 2025. 

Risk level  Countries (examples)  What it means for you  Minimum annual checks by authorities 
Low  All EU member states, the UK, the US, Canada, China, Vietnam, Japan, Australia (around 140 countries)  Simplified due diligence: collect the information, but no full risk assessment or mitigation unless you learn of a risk  1% of operators 
Standard  Every country not listed as low or high, including Brazil and Indonesia  Full due diligence: information, risk assessment and mitigation  3% of operators 
High  Belarus, Myanmar, North Korea, Russia  Full due diligence and the closest scrutiny  9% of operators and 9% of each product’s volume 

Low risk does not mean exempt. You still need geolocation, legality evidence and a due diligence statement, and you must act if you find signs of risk. China and Vietnam are low risk, but both process large volumes of wood, rubber and other commodities imported from standard-risk countries. What matters is the country where the commodity was produced, not where the finished product was made. 

  • Record the country of production for every input, not just the country of export 
  • Apply full due diligence to any input from a standard or high-risk country 
  • Re-check the list regularly, as the Commission can update it 

Step 7: Submit your due diligence statement 

Before goods are placed on the EU market or exported, the operator must submit a due diligence statement (DDS) in the EU Information System (TRACES) and receive a reference number. That number goes on the customs declaration, so without it the goods can’t clear customs. 

 

By filing a DDS, you confirm that you carried out due diligence and found no risk, or only negligible risk, that the product is non-compliant. You take legal responsibility for that statement. 

The Information System has been updated for 2026 under Implementing Regulation (EU) 2026/1565. It now supports grouping statements, the simplified declaration for small primary operators, and contingency numbers if the system goes down. Since 15 October 2026, each statement is assigned to the authority of the member state where the operator is established. 

  • Register your company in TRACES (operators, plus non-SME downstream operators and traders) 
  • Practise filing in the TRACES test environment before going live 
  • Prepare your GeoJSON files and product data in the format the system expects 
  • Submit the DDS before placing goods on the market or exporting 
  • Put the DDS reference number on the customs declaration 
  • If you’re a downstream company, collect and keep the reference number of the original DDS 
  • Book a place on the Commission’s TRACES training sessions 

Step 8: Get ready for inspections 

From 30 December 2026, national authorities must check a set share of operators every year (at least 1%, 3% or 9% depending on country risk), and checks can happen without warning. Compliance isn’t a one-off project: you need to be able to show your work at any time. 

Authorities typically look at your due diligence system, your risk assessments, the information behind each due diligence statement, and whether the products match what you declared. They can also carry out field checks, take samples, and use satellite monitoring. 

  • Name an internal owner for EUDR and document your due diligence procedure 
  • Keep a file for every DDS: supplier data, geolocation, legality evidence, risk assessment and mitigation 
  • Review and update your due diligence system at least once a year 
  • Re-assess suppliers when you add new sources or get new information about risk 
  • Prepare a response plan for when an authority gets in touch: who answers, where documents are stored, how fast you can produce them 
  • Train purchasing, logistics and customs teams on what EUDR changes in their daily work 

What happens if you don’t comply? 

Penalties are set by each EU member state, but the regulation requires maximum fines of at least 4% of a company’s total annual EU turnover. Authorities can also impose: 

  • Confiscation of the non-compliant products and of the revenue made from them 
  • Temporary exclusion, for up to 12 months, from public procurement and public funding 
  • A temporary ban on placing products on, or exporting them from, the EU market 
  • Loss of the right to use simplified due diligence 

 

National implementing laws are still being finalised in several member states. Germany, for example, sent its implementing act to the Bundestag in September 2026, with its federal agriculture and food agency (BLE) named as the competent authority. 

How HQTS can help you prepare for EUDR 

HQTS helps brands, importers and suppliers build EUDR compliance from the source up, from a first gap analysis to a working due diligence and traceability system. With more than 40 offices, technical experts in over 80 countries and more than 50,000 clients served since 1995, we can support you at every step of this checklist. 

If you’re not sure where to start, an EUDR gap analysis compares your current processes with what the regulation requires and gives you a prioritised action list. From there, we can help you set up your due diligence system, with the procedures, templates and ongoing support you need to collect information, assess risk and mitigate it. Our traceability system consulting helps you collect and organise supply chain data back to the source, and choose the right traceability tools for your business. 

Need help getting your supply chain EUDR-ready before 30 December 2026? Contact the HQTS team or email inquiry@hqts.com to book an EUDR gap analysis. 

Need More Information?

     

    * Required fields

    Facebook
    Twitter
    LinkedIn

    Latest Articles

    HQTS Quality Control
    Privacy Overview

    This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful. More information about our Privacy Policy